HSJ-805 decolorizing flocculant
Classification:
Product Introduction
Product characteristics
This product is a set of decolorization, flocculation in one of the cationic organic polymer compounds. The decolorization rate of printing and dyeing wastewater is more than 99%, and the removal rate of COD is between 50% and 85%.
Technical indicators
The following are typical properties of HSJ-805, but should not be considered as indicators of product availability. Product indicators are available.
| Project |
Indicators |
| pH (1% aqueous solution) |
3.0~4.0 |
| Density (20 ℃) g/cm³ |
1.15±0.10 |
| Solid content% |
≥ 25 |
Method of use
Dilute this product with 10-40 times water, and then directly into the water, stirring for a few minutes after sedimentation or air flotation, you can get the clear liquid after decolorization.
The treatment effect can be improved by adjusting the pH value of wastewater to 7-10.
When the chromaticity and CODCr of wastewater are high, it can be used with polymeric aluminum, but it cannot be mixed. This can reduce the processing cost. Whether to add polyaluminum chloride first or later should be determined according to the test and processing technology.
Product storage
Plastic drum packaging, net weight 25kg per barrel. Store in a cool and ventilated place indoors, avoid freezing ice, and store for 12 months.
Emergency measures
This agent is non-toxic, but it has a certain stimulating effect on human skin, eyes, nose and throat. Therefore, chemical protective gloves and goggles should be worn during operation; the diluted solution should be used in time as much as possible to make the flocculation effect best.
Enterprise Environment
Company Panorama
Company Panorama
Office Building
Factory display
Factory display
Factory display
Workshop equipment
Workshop 1
Key words:
The next one:
Online consultation
Fill in your phone and E-mail information, it will help us to contact you in time and solve your problem as soon as possible.